[18/Apr/2018] Accurate 300-135 Braindumps Questions With VCE Dumps Offered By Examsout

Examsout.com is one of the most reliable Company in providing certification preparation materials for Cisco 300-135 braindumps. We provide you the 100% guaranteed success to clear the certification exams in your first attempt with our comprehensive resources and clear practice guidelines.

Keywords: 300-135 exam dumps, 300-135 exam questions, 300-135 VCE dumps, 300-135 PDF dumps, 300-135 practice tests, 300-135 study guide, 300-135 braindumps, Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

Tips To Pass 300-135 braindumps Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) Exam

Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) Exam 300-135 exam is one of the most popular braindumps exams in IT industry. A huge number of IT Enterprises sought for Web Design Development Certified Architecture and they have placed Cisco CCNP Data Center 300-135 braindumps exam as a qualification for their jobs. That's why a lot of IT professionals, particularly developers, implementation consultants, technical support personnel, and system administrators are putting a lot of effort to look for the right kind of exam preparation materials for 300-135 Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) Exam. In doing so, many of them get lost within the vast jungle of preparation references, books and what not. And they are investing their major chunk of time not in the real practice but in searching the appropriate study materials and exam guidelines. So stop wasting your time and effort, and start your real practice from today.

Try These Cisco 300-135 Actual Questions And Answers

QUESTION NO: 3

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.

Use the supported commands to isolated the cause of this fault and answer the following questions.

What is the solution to the fault condition?

A. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.

 B. Under the ip access-list extended edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command.

C. Under the ip access-list extended edge_security configuration delete the deny ip 10.0.0.0.0 0.255.255.255 any command.

D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access-group edge_security out command.

Answer: B

Explanation:

On R1,  we need to permit IP 209.65.200.222/30 under the access list.

Topic 12, Ticket 7 : Port Security

Topology Overview (Actual Troubleshooting lab design is for below network design)

o Client Should have IP 10.2.1.3

o EIGRP 100 is running between switch DSW1 & DSW2

o OSPF (Process ID 1) is running between R1, R2, R3, R4

o Network of OSPF is redistributed in EIGRP

o BGP 65001 is configured on R1 with Webserver cloud AS 65002

o HSRP is running between DSW1 & DSW2 Switches

The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.

This network consists of four routers, two layer 3 switches and two layer 2 switches.

In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.

DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.

R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the ISP’s network. Because the company’s address space is in the private range.

R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside (209.65.0.0/24) network.

ASW1 and ASW2 are layer 2 switches.

NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.

The client workstations receive their IP address and default gateway via R4’s DHCP server.

The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1 and DSW2.

In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.

DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.

The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the underlying IPv4 OSPF domain. Redistrution is enabled where necessary.

Recently the implementation group has been using the test bed to do a ‘proof-of-concept’ on several implementations. This involved changing the configuration on one or more of the devices. You will be presented with a series of trouble tickets related to issues introduced during these configurations.

Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and solution.

Each ticket has 3 sub questions that need to be answered & topology remains same.

Question-1 Fault is found on which device,

Question-2 Fault condition is related to,

Question-3 What exact problem is seen & what needs to be done for solution

===============================================================================

Client is unable to ping IP 209.65.200.241

Solution

Steps need to follow as below:-

1) When we check on client 1 & Client 2 desktop we are not receiving DHCP address from R4

ipconfig  ----- Client will be getting 169.X.X.X

2) On ASW1 port Fa1/0/ 1 & Fa1/0/2 access port VLAN 10 was assigned but when we checked interface it was  showing down

Sh run -------  check for running config of int fa1/0/1 & fa1/0/2 (switchport access Vlan 10 will be there with switch

port security command). Now check as below

Sh int fa1/0/1 & sh int fa1/0/2

3) As seen on interface the port is in err-disable mode so need to clear port.

4) Change required: On ASW1, we need to remove port-security under interface fa1/0/1 & fa1/0/2.

--------------------------------------------------------------------------------------------------------------------------

QUESTION NO: 1

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.

Use the supported commands to isolated the cause of this fault and answer the following questions.

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

H. ASW2

Answer: G

Explanation:

port security needs is configured on ASW1.

QUESTION NO: 2

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.

Use the supported commands to isolated the cause of this fault and answer the following questions.

The fault condition is related to which technology?

A. NTP

B. Switch-to-Switch Connectivity

C. Access Vlans

D. Port Security

E. VLAN ACL / Port ACL

F. Switch Virtual Interface

Answer: D

Download the newest Examsout 300-135 dumps from examsout.com now! 100% Pass Guarantee!

300-135 PDF dumps & 300-135 VCE dumps: https://www.examsout.com/300-135-exam.html (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)