[18/Apr/2018 Updated] Examsout Free 300-160 braindumps PDF Study Guide and VCE Dumps

Examsout.com is one of the most reliable Company in providing certification preparation materials for Cisco 300-160 braindumps. We provide you the 100% guaranteed success to clear the certification exams in your first attempt with our comprehensive resources and clear practice guidelines.

Keywords: 300-160 exam dumps, 300-160 exam questions, 300-160 VCE dumps, 300-160 PDF dumps, 300-160 practice tests, 300-160 study guide, 300-160 braindumps, Designing Cisco Data Center Unified Computing

Tips To Pass 300-160 braindumps Designing Cisco Data Center Unified Computing Exam

Designing Cisco Data Center Unified Computing Exam 300-160 exam is one of the most popular braindumps exams in IT industry. A huge number of IT Enterprises sought for Web Design Development Certified Architecture and they have placed Cisco 300-160 braindumps exam as a qualification for their jobs. That's why a lot of IT professionals, particularly developers, implementation consultants, technical support personnel, and system administrators are putting a lot of effort to look for the right kind of exam preparation materials for 300-160 Designing Cisco Data Center Unified Computing Exam. In doing so, many of them get lost within the vast jungle of preparation references, books and what not. And they are investing their major chunk of time not in the real practice but in searching the appropriate study materials and exam guidelines. So stop wasting your time and effort, and start your real practice from today.

Try These Cisco 300-160 Actual Questions And Answers

QUESTION NO: 5

Which two platforms support the FCoE protocol? (Choose two)

A. Cisco Nexus 2332TQ Series

B. Cisco MDS 9148S Series

C. Cisco Nexus 7010 Series

D. Cisco MDS 9222i Series

E. Cisco Nexus 2248TP Series

Answer: CD

QUESTION NO: 6

Service graphs are used to define which option on the Cisco ACI platform?

A. a function that a contract must use to get to another contract

B. a function that an EPG must use to get to another EPG

C. the contract between two EPGs

D. the Cisco APIC definitions of the contracts in REST API

Answer: B

QUESTION NO: 7

Which component is required to run FCoE?

A. converged network adapter

B. iSCSI gateway

C. host bus adapter

D. Fibre Channel adapter

Answer: A

Computers can connect to FCoE with converged network adapters (CNAs), which contain both Fibre Channel host bus adapter (HBA) and Ethernet Network Interface Card (NIC) functionality on the same adapter card. CNAs have one or more physical Ethernet ports. FCoE encapsulation can be done in software with a conventional Ethernet network interface card, however FCoE CNAs offload (from the CPU) the low level frame processing and SCSI protocol functions traditionally performed by Fibre Channel host bus adapters.

QUESTION NO: 8

Which two options are supported on Cisco UCS Fabric Interconnects that use native Fibre Channel connectivity? (Choose two)

A. iSCSI

B. NFS

C. DAS

D. SAN

E. iFCP

Answer: CD

QUESTION NO: 9

if you are connecting a Cisco UCS Fabric Interconnect in it's default mode to a SAN, what is the operating mode?

A. trunk

B. NPIV mode

C. switching

D. NPV mode

Answer: D

QUESTION NO: 10

You have a Cisco UCS B-Series chassis. To connect to a blade server by using a remote KVM console, you should connect to the IP address of which component?

A. mgmt0

B. CIMC

C. IPMI

D. CMP

Answer: B

QUESTION NO: 11

Which component of a Cisco Nexus 1000V Series switch is responsible for propagating configurations to virtual switches?

A. SUP

B. FEX

C. VSM

D. VEM

Answer: C

Product Architecture

The Cisco Nexus 1000V Series Switch has two major components (Figure 1): the virtual Ethernet module (VEM), which runs inside the hypervisor, and the virtual supervisor module (VSM), which manages the VEMs.

Virtual Supervisor Module

The Cisco Nexus 1000V Series VSM controls multiple VEMs as one logical modular distributed virtual switch. Configuration is performed through the VSM and is automatically propagated to the VEMs.

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-switch-vmware-vsphere/data_sheet_c78-492971.html

QUESTION NO: 12

You have a Cisco Nexus 5500 Series switch. What is the default load-balancing hash mechanism for traffic on FCoE port channels?

A. the source MAC address

B. the source IP address and the destination IP address

C. the source MAC address and the destination MAC address

D. the source TCP or UDP port and the destination TCP or UDP port

Answer: B

On Nexus 5500 the default load balancing mechanism on the LACP port-channel for FCoE traffic is "source-destination". In this default state, all the FCoE traffic takes the same link in the port-channel when the Nexus 5500 forwards frames over FCoE VE ports. In order to enable all links to be used in the port-channel for FCoE traffic, enter the port-channel load-balance ethernet source-dest-port command to configure Nexus 5500 "port-channel load balancing" to "source-dest-port". With this configuration "source-destination-oxid" load balancing is used for FCoE traffic.

QUESTION NO: 13

Which two characteristics are associated with the access layer of a Data Center Unified Fabric network? (Choose two)

A. voice, data, and wireless convergence

B. no packet manipulation

C. QoS—policing

D. routing manipulation and filtering

E. QoS - classification and queuing

Answer: AE

QUESTION NO: 14

Which option accurately describes the OSPF Graceful Restart feature in Cisco NX-OS?

A. keeps the control plane state active during an OSPF process restart

B. shuts down the OSPF process gracefully to replace the router

C. prevents the OSPF process from restarting when the process crashes

D. allows a router to remain in the data forwarding path during an OSPF process restart

Answer: D

A graceful restart, or nonstop forwarding (NSF), allows OSPFv2 to remain in the data forwarding path through a process restart. When OSPFv2 needs to perform a graceful restart, it sends a link-local opaque (type 9) LSA, called a grace LSA 

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/unicast/configuration/guide/l3_cli_nxos/l3_ospf.html#52215

QUESTION NO: 15

When you configure FCIP, which two types of acceleration can you enable to maximize WAN link utilization? (Choose two)

A. SCSI write

B. link

C. SCSI tape

D. WAN

E. IP

Answer: AC

http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664e20.html

QUESTION NO: 16

You use Cisco UCS Central to manage Cisco UCS. Which statement accurately describes how local and global policies are applied?

A. A local policy is applied by using Cisco UCS Central, and a global policy is applied by using Cisco UCS Director.

B. A local policy is applied by using Cisco UCS Manager, and a global policy is applied by using Cisco UCS Central.

C. A local policy is applied by using Cisco UCS Director, and a global policy is applied by using Cisco UCS Central.

D. A local policy is applied by using Cisco UCS Central, and a global policy is applied by using Cisco UCS Manager.

Answer: B

Download the newest Examsout 300-160 dumps from examsout.com now! 100% Pass Guarantee!

300-160 PDF dumps & 300-160 VCE dumps: https://www.examsout.com/300-160-exam.html (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)